Wacker Neuson BTS 635s Betreibershandbuch PDF herunterladen (Seite 22)

3 Safety BTS 630, 635

22 Operator's manual

Belt guard

Never operate the machine without a belt guard!

Exposed V-belts and belt pulleys are dangerous and can cause serious injuries

if they pull in any part of your body or if parts are ejected.

Protective hood

Never operate the machine without a protective hood.

The protective hood performs the following functions:

 Protects the operator from the rotating cutting blade.

 Diverts workpiece particles and sparks or chips from a damaged cutting

blade away from the operator.

Set the protective hood such that its lower section is almost in contact with the

workpiece.

Wet cutting

Use a water sprayer when dust formation is excessive, e.g. when cutting

concrete or stone.

Only use cutting blades that are suitable for wet cutting.

Before ending the wet cutting process, allow the cutting blade to run without the

water sprayer until it is dry.

Notes regarding work methods

 Set the protective hood such that its lower section is almost in contact with

the workpiece. The protective hood can catch material flung away from the

work area and divert it away from the operator.

 Always operate the machine at full throttle even when first placing it into the

cut.

 When first placing the the cutting blade into the cut, set it slowly onto the

material. Excessive pressure can damage the cutting blade.

 Do not press down on the machine while cutting.

 Move the machine in a straight line together with the cutting blade. Pressure

from the side can damage the cutting blade.

 Do not use the upper quarter of the cutting blade to cut. Machine kickback

can cause severe injury.

Hold the machine with both hands

While working, as a rule hold the machine on the provided handles with both

hands.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Keine Kommentare

Wacker Neuson BTS 635s Betreibershandbuch Seite 22