Wacker Neuson BTS 635s Betreibershandbuch PDF herunterladen (Seite 69)

BTS 630, 635 13 Storage

Operator's manual 69

13 Storage

If the machine will not be operated for a while, e.g. during the winter, do the

following:

Performing preparations

1. Switch off the engine.

2. Detach the cutting blade and store in a dry place.

3. Let the machine cool off.

Emptying the fuel system

The gasoline in the fuel partially evaporates during long-term storage. The two-

cycle oil in the fuel does not evaporate. After long-term storage the mixture ratio

of gasoline to two-cycle oil is no longer correct. For this reason, the fuel system

must be be empty for long-term storage.

1. Remove any dirt around the fuel cap.

2. Slowly unscrew and remove the fuel cap.

3. Pump the fuel out into a suitable container or tank, e.g. with a suction pump.

4. Position the fuel cap and tighten it.

5. Start the engine and let it idle until the fuel in the carburetor is used up and

the engine stops.

Storing the machine

1. Clean the machine.

2. Store the machine in a dry place.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 79 80

Keine Kommentare

Wacker Neuson BTS 635s Betreibershandbuch Seite 69