Wacker Neuson GPS 5600A Betreibershandbuch PDF herunterladen (Seite 19)

GP/GPS 5600A Operation

2.4 Battery Tray Installation (GPS only)

2.4.1 Align the holes found in the battery tray (a) to the holes on the frame

cross-member

2.4.2 Insert M8 x 14 screws (b) through the tray then through the holes of

the cross-member.

2.4.3 Insert the nuts (c) onto the screws and tighten. Torque nuts to 18.75

Nm. (13.5 ft.lbs).

2.4.4 Align the holes in the battery tube (d) to the holes in front of the battery

tray.

2.4.5 Insert M8 x 35 screws (e) through the battery tray then through the

tube.

2.4.6 Insert the nuts (f) onto the screws and tighten. Torque nuts to 18.75

Nm. (13.5 ft.lbs).

2.4.7 Insert the tube clamps (g) onto the upper frame tube and align the

holes to the holes of the battery tube.

2.4.8 Insert M8 x 35 screws (h) through the battery tube then through the

tube clamps.

2.4.9 Insert the nuts (j) onto the bolts and tighten. Torque nuts to 18.75 Nm.

(13.5 ft.lbs).

2.4.10 Slide the J-bolt (k) through the holes found in the battery holder (l).

2.4.11 Insert the rounded end of the J-bolt (k) into the slot of the battery tray

and insert the tip of the J-bolt through the hole.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

Keine Kommentare

Wacker Neuson GPS 5600A Betreibershandbuch Seite 19