Wacker Neuson CRT 48-31V Betreibershandbuch PDF herunterladen (Seite 37)

CRT 48-31V-ES Maintenance

wc_tx000144gb.fm 35

5.10 Engine Oil

See Graphic: wc_gr000217

Drain oil while engine is still warm.

5.10.1 Remove oil fill cap (a) and drain plug (b) to drain oil.

Note: In the interests of environmental protection, place a plastic sheet

and a container under the machine to collect any liquid which drains

off. Dispose of this liquid in accordance with environmental protection

legislation.

5.10.2 Install drain plug and torque to 34.6 Nm (25.5 ft.lbs.).

5.10.3 Fill engine crankcase with recommended oil until the level is between

“L” and “F” on the dipstick (c).

Oil capacity: 3 l (3.2 qt.).

5.10.4 Install oil fill cap.

5.10.5 To replace the oil filter (d), remove the installed oil filter after oil has

been drained. Apply a thin coat of oil to the rubber gasket of the

replacement oil filter. Screw the filter on until it just contacts the filter

adapter, then turn it an additional ½ turn. Refill with oil as described

above.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Keine Kommentare

Wacker Neuson CRT 48-31V Betreibershandbuch Seite 37