Wacker Neuson CRT 48-31V Betreibershandbuch PDF herunterladen (Seite 38)

Maintenance CRT 48

38 wc_tx000642gb.fm

5.11 Vanguard—Spark Plug

Clean or replace spark plug as needed to ensure proper operation.

Refer to the engine owner’s manual.

Note: Refer to the Technical Data for the recommended spark plug

type and the electrode gap setting.

The muffler and engine cylinder become very hot during operation and

remain hot for a while after stopping the engine. Allow engine to cool

before removing spark plug.

5.11.1 Remove spark plug and inspect it.

5.11.2 Replace plug if the insulator is cracked or chipped. Clean spark plug

electrodes with a wire brush.

5.11.3 Set the electrode gap.

5.11.4 Tighten spark plug securely.

NOTICE: A loose spark plug can become very hot and may cause

engine damage.

WARNING

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 75 76

Keine Kommentare

Wacker Neuson CRT 48-31V Betreibershandbuch Seite 38