Wacker Neuson BFS 1350AL Betreibershandbuch

www.wackergroup.comOperator´s ManualGasoline powered floor sawBFS 1350AL0201438en 00210.2005

T00833GB8DESCRIPTIONField of applications* Cutting expansion joints in concrete and asphalt surfaces.* Repair jobs on roads, e.g. cutting out damaged

T00833GB9DESCRIPTIONDescription of functionThe floor saw should only be operated in a forward direction (see arrow).The drive engine (2), which is fas

T00833GB10DESCRIPTIONGeneral instruction for the use of diamond blades* Never use a blade of a diameter larger than necessary to cut a certain depth.*

T00834GB11TRANSPORT TO WORK SITETransport to work siteConditions:- Only use suitable lifting equipment with a minimum lifting capacity of 200 kg for t

T00835GB12OPERATIONGuide handle adjustmentThe guide handle can be individually adjusted to the height of the operator.Loosen the knurled thumb screws

T00835GB13OPERATIONCutting depth adjustmentPlace the quick-lift lever in the forward lock-in position; this will enable you to exactly adjust the cutt

T00835GB14OPERATIONWater tankThe floor saw has been equipped with an integrated, removable water tank (15). The filler opening (16) can befound at top

T00835GB15OPERATIONRemoval of the cutting discProceed as follows to remove a cutting disc:1. Apply parking brake (6), stop engine (23) and stop water

T00835GB16OPERATIONRight-hand, left-hand cutting conversionTo switch the cutting blade from one side to the other proceed as follows:1. Disassemble th

T00835GB17OPERATIONEngine check before starting1. Oil level checkInsert dipstick in oil filter neck, but without screwing in. If oil level is low, fil

T00835GB18OPERATION3. Push throttle lever (4) slightly forward.4. Turn main switch (23) to position ”1”.5. Pull starter handle out slowly until a slig

T00835GB19OPERATIONStopping the engineTurn the main switch to the position ”0” to stop the engine in an emergency.Proceed as follows under normal work

T00836GB20MAINTENANCEMaintenance scheduleCheck all external screw connections for tight fit approx. 8 hours after first operation.Parts Maintenance jo

T00836GB21MAINTENANCEOil changeDrain the oil while the motor is still warm to assure rapid and complete draining.1. Remove the oil filler cap drain pl

T00836GB22MAINTENANCECleaning the fuel filter cupClose the fuel tap. Remove the cup with the O-ring and clean with non-inflammable or hardly-inflammab

T00836GB23MAINTENANCEAdjusting drive belt tensionThe tension of the belt should be checked at the time of the weekly engine maintenance and, if necess

SK00652GB24ELECTRIC WIRING DIAGRAMEngineGroundFuel line yellow/blackGround FramebrownSwitchbrownyellow

SK00651GB25LABELS1 Warning sign2 Lifting point3 Notice sign4 Notice sign5 Notice sign6 Notice sign8 Type9 Wacker Logo10 Sound power level

26

C0003306.GBEC - CONFORMITY-CERTIFICATEWacker Construction Equipment AG , Preußenstraße 41, 80809 Münchenhereby certify that the construction equipment

T00943GB1IMPORTANT INFORMATIONImportant informationThis machine has been equipped with an EPA certified engine.Additional information can be found in

28

DIN EN ISO 9001 CERTIFICATE

Wacker Construction Equipment AG - Preußenstraße 41 - 80809 München - Tel.: +49-(0)89-3 54 02-0 - Fax: +49-(0)89-3 54 02-390Wacker Corporation - P.O.

2

T00778GB3FOREWORDForewordFor your own safety and protection from bodily injuries, carefully read, understand and follow the safety instruc-tions in th

4TABLE OF CONTENTSIMPORTANT INFORMATION 1FOREWORD 3SAFETY INSTRUCTIONS 5General instructions 5Operation 5Safety checks 6Maintenance 6Transport 6M

SV00059GB5SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS FOR THE USE OF FLOOR SAWSWITH COMBUSTION ENGINEGeneral instructions1. Floor saws may only be operated

SV00059GB6SAFETY INSTRUCTIONS15. Always wear protective goggles, hearing protection, work gloves, protective helmet, tight-fitting clothingand safety

TD00673GB7TECHNICAL DATABFS 1350AL BFS 1350LBFS1350ALSItem no. 0008898 ... 0008936 ... 0008885 ...Weight kg: 136 134 153Power transmission From drive