Wacker Neuson CRT 48-31V Betreibershandbuch PDF herunterladen (Seite 33)

CRT 36-24A/25 Maintenance

wc_tx000640gb.fm 33

4.4 Control Arm Adjustment (Forward or Backward)

See Graphic: wc_gr003732

The control arms should line up evenly. If arms appear out of

adjustment, they can be re-adjusted forward or backward as follows:

4.4.1 Loosen jam nuts (b).

4.4.2 Turn the vertical linkage (a) as follows:

• Extend the linkage to adjust control levers forward. See section

4.5 before extending linkage.

• Shorten the linkage to adjust control levers backward.

4.4.3 After the arms have been adjusted to the desired position, tighten jam

nuts (b).

NOTICE: Control arms are adjusted as part of the steering assist system.

Changing orientation of the control arms may affect steering effort.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 57 58

Keine Kommentare

Wacker Neuson CRT 48-31V Betreibershandbuch Seite 33